How to Attach Your New Hover Trimmer Kit.
Here we will walk you through the easy to follow step by step instructions on how to fit your new hover trimmer kit.
The Hover Trimmer is the safest fastest grass and bush cutter head kit available on the market today. It's unique hover dome protects the operator from flying debris associated with string head strimmers. Please note traditional trimmer string can cause damage to shrubs and small trees. The Hover Trimmer protects against all.
PLEASE NOTE PRODUCT DOME COVERS PLUS BLADE COLOURS CAN CHANGE IN COLOUR FROM TIME TO TIME DURING MANUFACTURING PERIOD.
Our Current Images Are Up To Date 2012/2014.
| HOW TO ASSEMBLE YOUR NEW PATENTED HOVER TRIMMER SYSTEM - FIRSTLY - DISMANTLING YOUR EXISTING ROTATING LINE OR BLADE HEAD - | |||
| 1 |  | 2 |  |
| Starting point: – Normal Configuration | Pics 2 , 3 & 4 Dismantling Line Head: | ||
| 3 |  | 4 |  |
| Lock the gear shaft by inserting a screw driver into the holder on the gear and turn the Line Head in a clockwise direction. Or you may have a special tool that came with your trimmer. | |||
| 5 |  | 6 |  |
| Pics 5, 6, 7 & 8 - Removing two Holders - If present remove the anti-tangling cup | |||
| 7 |  | 8 |  |
| 9 |  | 10 |  |
| Pics 9 & 10 Dismantling cutting head from the shaft Remove the bolts/screws screwed into the shaft then loosen the main bolt of the cutting head. The cutting head easily will come out from the shaft | |||
| 11 |  | 12 |  |
| Pics 11 & 12 - Dismantling Guard Remove all the bolts on the Guard and remove the Guard from the shaft | |||
| - NOW TO ASSEMBLE YOUR HOVER TRIMMER HIGH SAFETY DOME HEAD - | |||
| 13 |  | 14 |  |
| Pics 13 & 14 Loosen the Cover nuts with the wrench supplied with the Cover then raise the red guide tabs | |||
| 15 |  | 16 |  |
| Pics 15 & 16 Insert the Cover into the shaft (DO NOT THIGHTEN THE NUTS) Next, reassemble the Cutting Head. Check that the bolts/screws are firmly tightened | |||
| - NOW TO ASSEMBLE YOUR HOVER TRIMMER PATENTED BLADES - Note: the blade is assembled in the same way as a normal blade | |||
| 17 |  | 18 |  |
| Pics 17 & 18 Insert the Holder (Pic17) provided with the blade housing. Now position the propeller in the blade housing of the cutting head with theblade nuts upwards | |||
| 19 |  | 20 |  |
| Pics 19 & 20 Insert the metal holder (Pic 19) and the nut (or bolt) already supplied with the Hover Trimmer on the blade. Now tighten the nut (or bolt) firmly counter clockwise (locking the gear shaft by inserting a screw driver the same as when you dismantled your existing line head | |||
| - TIGHTENING YOUR HOVER TRIMMER HIGH SAFETY DOME - | |||
| 21 |  | 22 |  |
| Pics 21 & 22 After tightening the propeller blade, position it perpendicularly to the line of the shaft. (Pic 21) Slide down the Cover over the blade keeping the sides of the cover parallel in distance to the blade on each side. Leave approx 4 cm clearance between the blade edge and the cover edge (Note: Check that the black rubber washer is in the correct position as shown in Pic 22 | |||
| 23 |  | 24 |  |
| Pics 23 & 24 - Stongly tighten the nuts and the internal screw of the red guide tabs. ENJOY YOUR NEW PROFESSIONAL HOVER TRIMMER | |||
| - MAINTAINING YOUR HOVER TRIMMER PATENTED BLADE - | |||
| 25 |  | 26 |  |
| Pics 25 & 26 Your new Hover Trimmer System also comes with a blade sharpening file. Before starting work sharpen the blade by filing the propeller it in each upper sharp side throughout the length by rapid movement (3-4 times per side). KEEPING THE BLADE SHARP will protect it from rapid deterioration. | |||
| 27 |  | 28 |  |
| Pics 27 & 28 - Use the file upside down (Pic 27). To reach equilibrium/balance sharpen the heavier side of the blade (Pic 28) | |||
- LAST BUT NOT LEAST SOME GENERAL INSTRUCTIONS
FOR THE SAFE AND LONG LASTING USE OF YOUR HOVER TRIMMER -
 | Pay close attention while using the blade. Carefully read the information supplied with the Hover Trimmer and on the manufacturer's instruction manual. |
| Before beginning to work with the Hover Trimmer, warm up your trimmer motor for around 2 min. Before putting the blade on the ground accelerate the engine for 5 seconds. The propeller blade will create a cushion of air that keeps the blade at 2-3 cm parallel to the ground. Whilst using the blade keep the engine at a constant and consistent (medium) velocity. |
| DO NOT use the blade with a rapid scything movement (more than 10/20 cm/s) as this could be dangerous and cause damage to the blade. |
| To improve the PULVERIZATION keep the blade sharp and slightly tilt the blade in the direction of the movement |
| DO NOT use a warped, cracked, broken or damaged blade. |
| With the Hover Trimmer blade, it is possible to pulverise grass and cut young saplings, weeds or bushes, up to 2 cm in diameter. Any other use is not recommended.. For cutting young saplings, weeds, bushes, use a sharp blade and proceed by small cuts up to 1 cm. |
| The rotating blade must not come in contact with stones, metal or hard objects. |
| If the blade starts to shake or vibrate, turn off the engine and check the whole unit. Do not use it until the trouble has been properly corrected.Follow these instructions: (a) Read the manufacturer's instruction manual (b) Check if the blade is properly assembled and firmly tightened. (c)Check if the blade is unbalanced. Remove the blade and insert the Red plastic cylinder into the blade hole (See below Fig 28 above). Put a pin into the Red plastic cylinder hole, which will support the blade and position the blade horizontally. If you require any further help when fitting your new hover trimmer Kit please feel free to e-mail our support team who will be more than happy to assist you. Please use our contact button above to contact us. |